Clips & Accessories

Replacement clips for your clipboard, or try out a new colour – spring clips and wire clips in 70 mm, 110 mm and 120 mm.

Shipping €5.90 per order · free shipping from €79

As a replacement or to try a new colour. Click the image for a larger view.

All clips from our configurator can also be ordered individually as a spare part or upgrade. They are made of metal with a base plate thickness of approx. 0.3 mm and reliably hold paper, cardboard and similar materials. The clips are attached to the clipboard with two rivets (Ø 4 mm hole) – rivets are not included.

Spring Clip

The spring clip (also known as a clipboard clamp or a metal clip with a handle) holds paper and cardboard in place using a toothed base plate with an upward-folding handle. It comes in two widths and 7 colours – compatible with all clipboards from our configurator.

Spring Clip 70 mm

For A5 and A6 clipboards

Width	70 mm
Toothed Edge (Total)	approx. 90 mm
Rivet Hole Spacing	61 mm
Rivet Hole Diameter	4 mm
Height (incl. Handle)	approx. 20 mm
Base Plate Thickness	approx. 0.3 mm
Capacity	approx. 10–12 mm
Colours	7 (Silver, Gold, Rose, Copper, Antique, Rainbow, Black)

Spring Clip 110 mm

For A3 and A4 clipboards

Width	110 mm
Toothed Edge (Total)	approx. 90 mm
Rivet Hole Spacing	100 mm
Rivet Hole Diameter	4 mm
Height (incl. Handle)	approx. 20 mm
Base Plate Thickness	approx. 0.3 mm
Capacity	approx. 10–12 mm
Colours	7 (Silver, Gold, Rose, Copper, Antique, Rainbow, Black)

Wire Clip

The wire clip works with a wire clamping mechanism: a springy metal wire (Ø approx. 2.5 mm) presses the paper against the base plate. It sits flatter on the board than the spring clip and is available in 70 mm and 120 mm widths. The 120 mm version is also available in Silver Carbon.

Wire Clip 70 mm

For clipboards A5 and A6

Width	70 mm
Rivet Hole Spacing	approx. 40 mm
Rivet Hole Diameter	4.2 mm
Wire Thickness	approx. 2.5 mm
Capacity	up to approx. 10 mm
Base Plate Thickness	approx. 0.3 mm
Colours	7 (Silver, Gold, Rose, Copper, Antique, Rainbow, Black)

Wire Clip 120 mm

For clipboards A3 and A4

Width	120 mm
Rivet Hole Spacing	approx. 87 mm
Rivet Hole Diameter	4.2 mm
Wire Thickness	approx. 2.5 mm
Capacity	up to approx. 10 mm
Base Plate Thickness	approx. 0.3 mm
Colours	8 (Silver, Gold, Rose, Copper, Antique, Rainbow, Black, Silver Carbon)

Spring Clip or Wire Clip – Which Suits You Better?

Spring Clip

Higher clamping force thanks to the toothed plate
Handle folds up – sheets can be inserted quickly
Ideal for many sheets or thicker paper
Fits: birch plywood, HDF, PLEXIGLAS^®
Sizes: 70 mm (A5/A6) · 110 mm (A3/A4)

Wire Clip

Flat design, sits close to the board
Springy wire – easy to open and close
Simple, modern look
Exclusive: Silver Carbon only available in 120 mm
Sizes: 70 mm (A5/A6) · 120 mm (A3/A4)

Clips are attached with two rivets (rivet hole diameter 4–4.2 mm). Rivets are not included. All clips can also be selected in the clipboard configurator.

Manufacturer and Product Safety

Information under the EU General Product Safety Regulation (GPSR) for the clips on this page:

Manufacturer

Foshan Vip Fashion Hardware Products Manufactory
Liansha Development Zone, Danzao Town
Nanhai District, Foshan City
Guangdong, China
Tel.: +86 138 2342 2312

Responsible person in the EU (importer)

Bütic GmbH
Bahnhofstraße 12
07381 Pößneck, Deutschland
E-Mail: kontakt@buetic.de
Tel.: +49 3647 5050811

Safety note: The clips are spring-loaded. Keep your fingers clear of the gap between clip and board when opening and closing.